PPUK600DFR
Front & Rear parking sensor installed just £159.99
PPUK600DFR
Front & Rear Parking sensors - £49.99
There are 6 parking sensors included with one piece cables,
4 on the reverse & 2 on the front. This parking sensor system can also be fitted to all makes of car, van, MPV,
4x4, motorhome. PPUK800DFR parking sensors have a LED display with a built in buzzer parking assist system with an increasing
frequency of beeps & lights the you get closer to an object, car, person etc.. culminating in a steady tone & solid
red on the display to tell you that you have entered a 30cm risk zone! The front sensor are operate via the footbrake
as well as a switch to avoid false alerts in slow moving traffic. The display also shows which side the danger
is too! The parking assist sensors come in 18 different colours but can be painted at extra cost (£25) if
required to match your car. They look superb installed on any vehicle. These car parking sensors can only be fitted
to vehicles with plastic bumpers & include a ten degree wedge to enable lower mounting & have a 1 year guarantee.
This front & reverse parking sensors are a great option if you don’t have a lot to spend. Please state which
colour you require or a black parking aid kit will be sent.
PPUK-TALK8 Real human voice Front & Rear Parking Sensors fitted
£175.00
PPUK-TALK8
Parking Sensors - £49.99
***Real human voice thats tells you how far away
you actually are! ***
There are 8 black ultrasonic parking sensors included with two piece cables.
The reverse sensors can be installed into plastic & metal bumpers so can be installed to nearly all makes of car,
van, MPV, 4x4, motorhome. PPUK-TALK8 human voice parking sensors consists of a 7 band digital LED display with a built
in 'real human female voice' which is VERY clear. The human voice 'TELLS' the driver the distance between
the car & the hazzard. With the help of the LED Display the parking assist display shows you which side the object
is too. When you get to the risk zone the human voice states 'STOP.....STOP! The Car parking reverse
sensors come in gloss black but can be painted at extra cost (£25) if required to match your car. They look superb
installed on any vehicle & are the next generation of parking sensors.
PPUK800DFR
Front & Rear parking sensors Fully installed - £179.99
PPUK800DFR
Front & rear Parking Sensors - £59.95
There are 8 parking sensors included with one piece cables, 4 on
the reverse & 4 on the front. This parking sensor system can also be fitted to all makes of car, van, MPV, 4x4,
motorhome. PPUK800DFR parking sensors have a LED display with a built in buzzer parking assist system with an increasing
frequency of beeps & lights the you get closer to an object, car, person etc.. culminating in a steady tone & solid
red on the display to tell you that you have entered a 30cm risk zone! The front sensor are operate via the footbrake
as well as a switch to avoid false alerts in slow moving traffic. The display also shows which side the danger
is too! The parking assist sensors come in 18 different colours but can be painted at extra cost (£25) if
required to match your car. They look superb installed on any vehicle. These car parking sensors can only be fitted
to vehicles with plastic bumpers & include a ten degree wedge to enable lower mounting & have a 1 year guarantee.
This front & reverse parking sensors are a great option if you don’t have a lot to spend. Please state which
colour you require or a black parking aid kit will be sent.
Valeo
Beep & Park kit 1 & 4 Combo front & rear sensors fully fitted - £249.99
Valeo
Beep & Park Combo front & rear kit - £129.99
Choose
the Valeo Combo kit from Pro Park UK. This kit comprises the Beep & Park kit 1 & the Beep & Park kit 4.
Creating a front and rear 8 parking sensor audio park assist. The beauty of the combo kit is that you get total
control from both kits as they are both independent to each other. The Valeo Beep & Park kit 1 switches on as soon
as you select reverse gear. We can also run a diode link line* to the front kit so both kits operate at the same time
too if required. The Beep & Park kit 4 operates the front sensors only. This can be connected in several different
ways. Option 1 is to have the link wire connected to the foot brake with an on/off switch. Option 2 is to have the link
line connected directly to a switch. Both options 1 & 2 are included as part of the standard kit. For an additional
cost we can add a speed switch (option 3) which will turn on the front parking sensors automatically when the vehicle speed
drops below 6mph replicating factory equipment. This switch IS NOT part of the standard kit. So please ask for
details. Each kit warns you by an audible buzzer increasing the frequency of beeps until you enter the 30cm danger zone
when you will hear a constant beep. Colour coding costs an additional £18.00 on this kit only.
Valeo Beep & Park combo kit Fully Fitted - £249.99
Valeo
Beep & Park Kit 5 Front & rear Parking sensors fully fitted - £259.99
Valeo
beep & Park Kit 5 front & rear parking kit - £139.99
The Beep & Park kit 5 system from Valeo is not just an accessory it's
also a high tech device that will make driving a real pleasure! If you dread parallel and reverse parking and even after years
of experience are still having trouble parking your vehicle after several tries, then the Beep & Park front & rear kit 5 system is just what you need. Just turn on
the ignition and the front sensors turn on for 30 seconds.
Using 4 front and 4 rear mounted parking sensors,
the Valeo Beep & Park kit 5 system
locates obstacles to the front and rear of the vehicle once reverse gear has been engaged (other vehicles, pedestrians, curbs,
etc) and informs the driver of their proximity with an audio signal that begins when an obstacle is 1.5 metres away, increasing
in volume as they approach the obstacle and becoming continuous when the vehicle comes within 30 cm of the object. A control
screen mounted on the dashboard provides additional information by displaying images, showing the zone behind the vehicle
clearly. Once removed from reverse gear the front sensors will remain active for another 30 seconds before they switch off.
The front sensors on Beep & Park kit 5 do not work independently, if you require the front sensors to work independently
please choose Beep & Park Combo (1 & 4).
With the Beep & Park system, vehicles can be parked quickly and easily in complete safety.
The Beep & Park kit 5 is supplied with a set of connectors, a mounting kit and screws, a drill adapted
to the diameter of the 18mm reverse & front parking sensors, angle correction rings.
Steelmate
PTS400FR Front & Rear Parking Sensors Installed - £265.00
Steelmate
PTS400FR Front & Rear Park Assist - £120.90
The
Steelmate PTS400FR is a buzzer based ultrasonic parking assist distance monitoring system for the front & rear.
The front turns by the push of the foot brake. They come with a Patented heavy rain proof design stopping those false alerts
you may find on some cheap parking sensors. Once engaged the park assist electronically scans the areas in front of
your vehicle during the parking / reversing process and acoustically warns you of any obstacles in your path by an audible
tone when you park. The audible beeps will change tones when the distance is becoming shorter and shorter, until a continuous
beep is heard. The Steelmate PTS400FR replicates main dealer factory quality & if fitted with the speed switch will
work exactly the same too. The ultrasonic parking sensors require just a 18mm hole. PTS400FR steelmate parking sensors
come in matt black, gloss black & Silver as standard or can be painted to suit the colour of the vehicle at an additional
cost (£25). They can also be mounted in metal bumpers with our additional steelmate adapters so can be fitted
to any car, van, 4x4, MPV, motorhome.
Steelmate
PTS600MN Front & Rear Parking Sensors Installed - £275.00
Steelmate
PTS600MN Front & Rear Park Assist - £168.90
The Steelmate PTS600MN
is a dual LED buzzer Display based ultrasonic parking assist distance monitoring system specifically made for the front &
rear. There are 6 parking sensors, 2 on the front & 4 on the reverse. The front park assist automatically
turns on once the brake pedal has been pressed. Its also compatible with our speed sense module (not included) so the
front parking sensors will turn on when your vehicle is moving below a set speed. Once engaged the park assist electronically
scans the areas around your vehicle during the parking / reversing process and warns you of any obstacles in your path. The
Steelmate PTS600MN replicates main dealer factory quality & if fitted with the speed switch will work exactly the same
too. The ultrasonic parking sensors require just a 18mm hole and have two piece cables along with the power loom and
buzzer. PTS600MN steelmate parking sensors come in matt / gloss black & Silver as standard or can be painted to suit the
colour of the vehicle at an additional cost (£25). They can also be mounted in metal bumpers with our additional steelmate adapters so can be fitted to any car, van, 4x4, MPV, motorhome.
Steelmate
PTS800MN Front & Rear Parking Sensors fitted - £299.00
Steelmate
PTS800MN Front & Rear Park Assist - £179.99
The Steelmate PTS800MN
is a LED Display based ultrasonic parking assist distance monitoring system specifically made for the front & rear. There
are 8 parking sensors in total, 4 front & 4 rear. The front park assist automatically turns on once the brake pedal
has been pressed. The PTS800MN is compatible with our speed sense module (not included) which gives you total control.
They come with a Patented heavy rain proof design stopping those false alerts you may find on some cheap parking sensors.
Once engaged the park assist electronically scans the areas in front of your vehicle during the parking / reversing
process and acoustically warns you of any obstacles in your path by an audible tone when you park. The audible beeps
will change tones when the distance is becoming shorter and shorter, until a continuous beep is heard. The Steelmate
PTS800MN replicates main dealer factory quality. The ultrasonic parking sensors require just a 18mm hole and have two piece
cables along with the power loom and buzzer. They can also be mounted in metal bumpers with our additional steelmate adapters can be fitted to any car, van, 4x4, MPV, motorhome & other vehicles to enable you to park
safely. Free colour coding available on fully fitted package only.
Beep
& Park Keeper Intelligent Parking sensor installed - £335.00*
Beep
& Park Keeper front & rear intelligent parking sensor - £199.99
Beep & Park keeper
is a front and rear parking assistance system with an anti-bump alert to protect your vehicle against the all too often clumsy
parking manoeuvres of other motorists in a hurry. Upon turning on the ignition the front sensors activate for 30 seconds.
When reverse / parallel parking, the sensors detect all obstacles at the front and rear of the vehicle and indicate
their distance from the bumper. The system features audible and visual warnings. You can leave your parked vehicle without worry, thanks to
the anti-bump functionality. The system detects vehicles that come too close to your car and gives off a visual signal (flashing
the hazard warning lights) to encourage drivers to pay extra attention when
manoeuvring. The Beep&Park Keeper also has the optional feature of sounding the vehicles horn if required. The warnings give the impression that the owner of
the parked vehicle is nearby and has opened the vehicle using a remote control.When
parked, the intelligent sensors switch off if a parking vehicle is equipped
with ultrasonic parking sensors or if a pedestrian or cyclist pass close by. This gives you peace of mind so you can leave your vehicle without worrying, the valeo beep
& park keeper looks after your car while you are away. Again the front sensors trigger once reverse gear has been
selected as with all Beep & park kits with the Exception of the Beep & Park Combo kit.
* Please note
the Beep & Park Keeper is a vehicle dependent kit, therefore there are two fully fitted installation prices, £335.00
for non canbus e.g. SEAT Leon 1999 - 2005 & £399 for canbus e.g. SEAT Leon 2006>. Basically all newer vehicles
that run via a CANBUS operating system will require extra parts creating extra labour in order to operate the Keeper functions
due to the onBoard CANBUS wiring system. Please contact us if required for more information.
